Palram Nature 6 x 6 ft. Greenhouse - Twin-Wall

Comments about Palram Nature 6 x 6 ft. Greenhouse - Twin-Wall:

The greenhouse was easy to setup and had durable hardware with spare nuts and bolts in case you lose anything. After assembled it was very sturdy. I chose to mount it to a 4x4 pressure treated base with untreated 2x4's on top of them to give the greenhouse a little more headroom (5") and to give it a heavy enough base to not be affected by heavy winds. It is important not to have any pressure treated lumber touching the galvanized base due to corrosion. Leave the bolts a little bit loose until all the walls are up then tighten them, and then tighten the rest when the roof is finished. A 10mm open end wrench helps when tightening some of the bolts. Wear gloves because many of the parts are sharp enough that you could get cut if you are not careful.

Comments about Palram Nature 6 x 6 ft. Greenhouse - Twin-Wall:

I am a technical writer for operator and service manuals for large complex construction equipment. I have an engineering degree also. I think the assembly instuctions are geniously written using nearly only pictures. The only improvement would be a better latch on the door and roof vent, but I plan to make that change myself.